⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Adams County

Adams County, Idaho: well depth, water level & drilling cost

✓ 1,950 IDWR records · verified 2026-10-12

203 ftmedian well depth
131 ft–320 fttypical depth range
61 ftmedian static water level
20 gpmmedian yield (1,612 tests)

Pull every recorded well near a Adams County address — $49

How deep are wells in Adams County, Idaho?

The median drilled well depth in Adams County is 203 ft, based on 1,438 wells with recorded depths in the state IDWR database. Half of all wells fall between 131 ft and 320 ft; 90% are shallower than 425 ft. Wells drilled since 2016 have a median depth of 253 ft.

How much does it cost to drill a well in Adams County?

Applying published per-foot rates to the local median depth of 253 ft: drilling and casing alone typically runs $6,325–$16,445; a complete system including pump, pressure tank, and hookup typically runs $15,180–$25,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Adams County?

The median static water level is 61 ft below ground surface (middle half of wells: 25 ft–137 ft), from 1,754 measurements.

How much water do wells in Adams County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–35 gpm), from 1,612 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 29 50–100 ft 153 100–150 ft 264 150–200 ft 227 200–300 ft 344 300–400 ft 207 400–600 ft 174 600+ ft 40
Looking at a specific property in Adams County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Adams County

Free. Goes to licensed drillers working Adams County.

Well records by ZIP code in Adams County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.