⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Butte County › Moore (83255)

Moore, ID (83255): well depth, water level & drilling cost

✓ 601 IDWR records · Butte County

140 ftmedian well depth
100 ft–180 fttypical depth range
58 ftmedian static water level
40 gpmmedian yield (353 tests)

Pull every recorded well near a Moore (83255) address — $49

How deep are wells in and around Moore (83255), Idaho?

The median drilled well depth in and around Moore (83255) is 140 ft, based on 410 wells with recorded depths in the state IDWR database. Half fall between 100 ft and 180 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Moore (83255)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Moore (83255)?

The median static water level is 58 ft below ground surface (middle half of wells: 38 ft–82 ft), from 542 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 59 100–150 ft 170 150–200 ft 79 200–300 ft 73 300–400 ft 12 400–600 ft 4 600+ ft 1
Looking at a specific property in Moore (83255)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Moore (83255)

Free. Goes to licensed drillers working Butte County.

Part of Butte County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.