Idaho Well Data › Bingham County › Shelley (83274)
Shelley, ID (83274): well depth, water level & drilling cost
✓ 1,597 IDWR records · Bingham County
Pull every recorded well near a Shelley (83274) address — $49
How deep are wells in and around Shelley (83274), Idaho?
The median drilled well depth in and around Shelley (83274) is 163 ft, based on 1,260 wells with recorded depths in the state IDWR database. Half fall between 140 ft and 200 ft; 90% are shallower than 243 ft.
How much does it cost to drill a well in and around Shelley (83274)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Shelley (83274)?
The median static water level is 97 ft below ground surface (middle half of wells: 80 ft–110 ft), from 1,530 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bingham County.
Part of Bingham County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.