Idaho Well Data › Franklin County › Thatcher (83283)
Thatcher, ID (83283): well depth, water level & drilling cost
✓ 121 IDWR records · Franklin County
Pull every recorded well near a Thatcher (83283) address — $49
How deep are wells in and around Thatcher (83283), Idaho?
The median drilled well depth in and around Thatcher (83283) is 162 ft, based on 82 wells with recorded depths in the state IDWR database. Half fall between 88 ft and 244 ft; 90% are shallower than 350 ft.
How much does it cost to drill a well in and around Thatcher (83283)?
Applying published per-foot rates to the local median depth of 162 ft: drilling and casing alone typically runs $4,050–$10,530; a complete system including pump, pressure tank, and hookup typically runs $9,720–$16,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Thatcher (83283)?
The median static water level is 52 ft below ground surface (middle half of wells: 16 ft–131 ft), from 104 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Franklin County.
Part of Franklin County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.