Idaho Well Data › Blaine County › Sun Valley (83354)
Sun Valley, ID (83354): well depth, water level & drilling cost
✓ 1,085 IDWR records · Blaine County
Pull every recorded well near a Sun Valley (83354) address — $49
How deep are wells in and around Sun Valley (83354), Idaho?
The median drilled well depth in and around Sun Valley (83354) is 103 ft, based on 612 wells with recorded depths in the state IDWR database. Half fall between 62 ft and 180 ft; 90% are shallower than 279 ft.
How much does it cost to drill a well in and around Sun Valley (83354)?
Applying published per-foot rates to the local median depth of 103 ft: drilling and casing alone typically runs $2,575–$6,695; a complete system including pump, pressure tank, and hookup typically runs $6,180–$10,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Sun Valley (83354)?
The median static water level is 29 ft below ground surface (middle half of wells: 12 ft–75 ft), from 985 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Blaine County.
Part of Blaine County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.