Idaho Well Data › Bonneville County › Idaho Falls (83403)
Idaho Falls, ID (83403): well depth, water level & drilling cost
✓ 624 IDWR records · Bonneville County
Pull every recorded well near a Idaho Falls (83403) address — $49
How deep are wells in and around Idaho Falls (83403), Idaho?
The median drilled well depth in and around Idaho Falls (83403) is 200 ft, based on 407 wells with recorded depths in the state IDWR database. Half fall between 180 ft and 223 ft; 90% are shallower than 262 ft.
How much does it cost to drill a well in and around Idaho Falls (83403)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Idaho Falls (83403)?
The median static water level is 120 ft below ground surface (middle half of wells: 100 ft–135 ft), from 570 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bonneville County.
Part of Bonneville County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.