⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Teton County › Driggs (83422)

Driggs, ID (83422): well depth, water level & drilling cost

✓ 1,334 IDWR records · Teton County

180 ftmedian well depth
125 ft–240 fttypical depth range
75 ftmedian static water level
20 gpmmedian yield (594 tests)

Pull every recorded well near a Driggs (83422) address — $49

How deep are wells in and around Driggs (83422), Idaho?

The median drilled well depth in and around Driggs (83422) is 180 ft, based on 1,039 wells with recorded depths in the state IDWR database. Half fall between 125 ft and 240 ft; 90% are shallower than 320 ft.

How much does it cost to drill a well in and around Driggs (83422)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Driggs (83422)?

The median static water level is 75 ft below ground surface (middle half of wells: 40 ft–112 ft), from 1,286 measurements.

Drilled depth distribution

0–50 ft 13 50–100 ft 82 100–150 ft 270 150–200 ft 195 200–300 ft 338 300–400 ft 76 400–600 ft 57 600+ ft 8
Looking at a specific property in Driggs (83422)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Driggs (83422)

Free. Goes to licensed drillers working Teton County.

Part of Teton County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.