⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Jefferson County › Hamer (83425)

Hamer, ID (83425): well depth, water level & drilling cost

✓ 652 IDWR records · Jefferson County

146 ftmedian well depth
100 ft–228 fttypical depth range
62 ftmedian static water level
50 gpmmedian yield (105 tests)

Pull every recorded well near a Hamer (83425) address — $49

How deep are wells in and around Hamer (83425), Idaho?

The median drilled well depth in and around Hamer (83425) is 146 ft, based on 500 wells with recorded depths in the state IDWR database. Half fall between 100 ft and 228 ft; 90% are shallower than 350 ft.

How much does it cost to drill a well in and around Hamer (83425)?

Applying published per-foot rates to the local median depth of 146 ft: drilling and casing alone typically runs $3,650–$9,490; a complete system including pump, pressure tank, and hookup typically runs $8,760–$14,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hamer (83425)?

The median static water level is 62 ft below ground surface (middle half of wells: 26 ft–137 ft), from 601 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 88 100–150 ft 154 150–200 ft 80 200–300 ft 94 300–400 ft 37 400–600 ft 29 600+ ft 6
Looking at a specific property in Hamer (83425)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hamer (83425)

Free. Goes to licensed drillers working Jefferson County.

Part of Jefferson County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.