⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Bonneville County › Irwin (83428)

Irwin, ID (83428): well depth, water level & drilling cost

✓ 583 IDWR records · Bonneville County

120 ftmedian well depth
80 ft–300 fttypical depth range
28 ftmedian static water level
16 gpmmedian yield (222 tests)

Pull every recorded well near a Irwin (83428) address — $49

How deep are wells in and around Irwin (83428), Idaho?

The median drilled well depth in and around Irwin (83428) is 120 ft, based on 426 wells with recorded depths in the state IDWR database. Half fall between 80 ft and 300 ft; 90% are shallower than 473 ft.

How much does it cost to drill a well in and around Irwin (83428)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Irwin (83428)?

The median static water level is 28 ft below ground surface (middle half of wells: 20 ft–74 ft), from 545 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 128 100–150 ft 99 150–200 ft 36 200–300 ft 36 300–400 ft 43 400–600 ft 50 600+ ft 16
Looking at a specific property in Irwin (83428)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Irwin (83428)

Free. Goes to licensed drillers working Bonneville County.

Part of Bonneville County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.