Idaho Well Data › Bonneville County › Swan Valley (83449)
Swan Valley, ID (83449): well depth, water level & drilling cost
✓ 297 IDWR records · Bonneville County
Pull every recorded well near a Swan Valley (83449) address — $49
How deep are wells in and around Swan Valley (83449), Idaho?
The median drilled well depth in and around Swan Valley (83449) is 115 ft, based on 223 wells with recorded depths in the state IDWR database. Half fall between 80 ft and 180 ft; 90% are shallower than 456 ft.
How much does it cost to drill a well in and around Swan Valley (83449)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Swan Valley (83449)?
The median static water level is 15 ft below ground surface (middle half of wells: 7 ft–59 ft), from 280 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bonneville County.
Part of Bonneville County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.