⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Teton County › Tetonia (83452)

Tetonia, ID (83452): well depth, water level & drilling cost

✓ 532 IDWR records · Teton County

120 ftmedian well depth
100 ft–280 fttypical depth range
40 ftmedian static water level
20 gpmmedian yield (257 tests)

Pull every recorded well near a Tetonia (83452) address — $49

How deep are wells in and around Tetonia (83452), Idaho?

The median drilled well depth in and around Tetonia (83452) is 120 ft, based on 421 wells with recorded depths in the state IDWR database. Half fall between 100 ft and 280 ft; 90% are shallower than 420 ft.

How much does it cost to drill a well in and around Tetonia (83452)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tetonia (83452)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–105 ft), from 506 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 76 100–150 ft 148 150–200 ft 34 200–300 ft 59 300–400 ft 39 400–600 ft 42 600+ ft 18
Looking at a specific property in Tetonia (83452)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tetonia (83452)

Free. Goes to licensed drillers working Teton County.

Part of Teton County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.