Idaho Well Data › Lemhi County › North Fork (83466)
North Fork, ID (83466): well depth, water level & drilling cost
✓ 224 IDWR records · Lemhi County
Pull every recorded well near a North Fork (83466) address — $49
How deep are wells in and around North Fork (83466), Idaho?
The median drilled well depth in and around North Fork (83466) is 52 ft, based on 162 wells with recorded depths in the state IDWR database. Half fall between 35 ft and 160 ft; 90% are shallower than 372 ft.
How much does it cost to drill a well in and around North Fork (83466)?
Applying published per-foot rates to the local median depth of 52 ft: drilling and casing alone typically runs $1,300–$3,380; a complete system including pump, pressure tank, and hookup typically runs $3,120–$5,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around North Fork (83466)?
The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–33 ft), from 197 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lemhi County.
Part of Lemhi County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.