Idaho Well Data › Idaho County › Ferdinand (83526)
Ferdinand, ID (83526): well depth, water level & drilling cost
✓ 123 IDWR records · Idaho County
Pull every recorded well near a Ferdinand (83526) address — $49
How deep are wells in and around Ferdinand (83526), Idaho?
The median drilled well depth in and around Ferdinand (83526) is 260 ft, based on 68 wells with recorded depths in the state IDWR database. Half fall between 200 ft and 401 ft; 90% are shallower than 500 ft.
How much does it cost to drill a well in and around Ferdinand (83526)?
Applying published per-foot rates to the local median depth of 260 ft: drilling and casing alone typically runs $6,500–$16,900; a complete system including pump, pressure tank, and hookup typically runs $15,600–$26,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ferdinand (83526)?
The median static water level is 60 ft below ground surface (middle half of wells: 25 ft–121 ft), from 115 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Idaho County.
Part of Idaho County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.