⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Nez Perce County › Peck (83545)

Peck, ID (83545): well depth, water level & drilling cost

✓ 277 IDWR records · Nez Perce County

328 ftmedian well depth
221 ft–435 fttypical depth range
125 ftmedian static water level
10 gpmmedian yield (251 tests)

Pull every recorded well near a Peck (83545) address — $49

How deep are wells in and around Peck (83545), Idaho?

The median drilled well depth in and around Peck (83545) is 328 ft, based on 155 wells with recorded depths in the state IDWR database. Half fall between 221 ft and 435 ft; 90% are shallower than 600 ft.

How much does it cost to drill a well in and around Peck (83545)?

Applying published per-foot rates to the local median depth of 328 ft: drilling and casing alone typically runs $8,200–$21,320; a complete system including pump, pressure tank, and hookup typically runs $19,680–$32,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Peck (83545)?

The median static water level is 125 ft below ground surface (middle half of wells: 70 ft–233 ft), from 256 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 4 100–150 ft 9 150–200 ft 17 200–300 ft 34 300–400 ft 31 400–600 ft 42 600+ ft 17
Looking at a specific property in Peck (83545)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Peck (83545)

Free. Goes to licensed drillers working Nez Perce County.

Part of Nez Perce County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.