Idaho Well Data › Lewis County › Winchester (83555)
Winchester, ID (83555): well depth, water level & drilling cost
✓ 239 IDWR records · Lewis County
Pull every recorded well near a Winchester (83555) address — $49
How deep are wells in and around Winchester (83555), Idaho?
The median drilled well depth in and around Winchester (83555) is 278 ft, based on 160 wells with recorded depths in the state IDWR database. Half fall between 175 ft and 450 ft; 90% are shallower than 625 ft.
How much does it cost to drill a well in and around Winchester (83555)?
Applying published per-foot rates to the local median depth of 278 ft: drilling and casing alone typically runs $6,950–$18,070; a complete system including pump, pressure tank, and hookup typically runs $16,680–$27,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Winchester (83555)?
The median static water level is 106 ft below ground surface (middle half of wells: 60 ft–250 ft), from 221 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lewis County.
Part of Lewis County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.