⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Boise County › Banks (83602)

Banks, ID (83602): well depth, water level & drilling cost

✓ 329 IDWR records · Boise County

220 ftmedian well depth
142 ft–327 fttypical depth range
72 ftmedian static water level
20 gpmmedian yield (220 tests)

Pull every recorded well near a Banks (83602) address — $49

How deep are wells in and around Banks (83602), Idaho?

The median drilled well depth in and around Banks (83602) is 220 ft, based on 212 wells with recorded depths in the state IDWR database. Half fall between 142 ft and 327 ft; 90% are shallower than 442 ft.

How much does it cost to drill a well in and around Banks (83602)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Banks (83602)?

The median static water level is 72 ft below ground surface (middle half of wells: 36 ft–141 ft), from 281 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 22 100–150 ft 29 150–200 ft 30 200–300 ft 51 300–400 ft 36 400–600 ft 31 600+ ft 4
Looking at a specific property in Banks (83602)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Banks (83602)

Free. Goes to licensed drillers working Boise County.

Part of Boise County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.