Idaho Well Data › Valley County › Donnelly (83615)
Donnelly, ID (83615): well depth, water level & drilling cost
✓ 2,864 IDWR records · Valley County
Pull every recorded well near a Donnelly (83615) address — $49
How deep are wells in and around Donnelly (83615), Idaho?
The median drilled well depth in and around Donnelly (83615) is 80 ft, based on 2,126 wells with recorded depths in the state IDWR database. Half fall between 51 ft and 185 ft; 90% are shallower than 320 ft.
How much does it cost to drill a well in and around Donnelly (83615)?
Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Donnelly (83615)?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–40 ft), from 2,675 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Valley County.
Part of Valley County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.