Idaho Well Data › Boise County › Horseshoe Bend (83629)
Horseshoe Bend, ID (83629): well depth, water level & drilling cost
✓ 603 IDWR records · Boise County
Pull every recorded well near a Horseshoe Bend (83629) address — $49
How deep are wells in and around Horseshoe Bend (83629), Idaho?
The median drilled well depth in and around Horseshoe Bend (83629) is 280 ft, based on 457 wells with recorded depths in the state IDWR database. Half fall between 165 ft and 400 ft; 90% are shallower than 520 ft.
How much does it cost to drill a well in and around Horseshoe Bend (83629)?
Applying published per-foot rates to the local median depth of 280 ft: drilling and casing alone typically runs $7,000–$18,200; a complete system including pump, pressure tank, and hookup typically runs $16,800–$28,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Horseshoe Bend (83629)?
The median static water level is 50 ft below ground surface (middle half of wells: 23 ft–92 ft), from 509 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Boise County.
Part of Boise County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.