Idaho Well Data › Valley County › Lake Fork (83635)
Lake Fork, ID (83635): well depth, water level & drilling cost
✓ 1,357 IDWR records · Valley County
Pull every recorded well near a Lake Fork (83635) address — $49
How deep are wells in and around Lake Fork (83635), Idaho?
The median drilled well depth in and around Lake Fork (83635) is 98 ft, based on 992 wells with recorded depths in the state IDWR database. Half fall between 68 ft and 152 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Lake Fork (83635)?
Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lake Fork (83635)?
The median static water level is 37 ft below ground surface (middle half of wells: 21 ft–64 ft), from 1,301 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Valley County.
Part of Valley County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.