Idaho Well Data › Washington County › Midvale (83645)
Midvale, ID (83645): well depth, water level & drilling cost
✓ 360 IDWR records · Washington County
Pull every recorded well near a Midvale (83645) address — $49
How deep are wells in and around Midvale (83645), Idaho?
The median drilled well depth in and around Midvale (83645) is 150 ft, based on 259 wells with recorded depths in the state IDWR database. Half fall between 84 ft and 266 ft; 90% are shallower than 385 ft.
How much does it cost to drill a well in and around Midvale (83645)?
Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Midvale (83645)?
The median static water level is 30 ft below ground surface (middle half of wells: 12 ft–60 ft), from 301 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.