⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Kootenai County › Athol (83801)

Athol, ID (83801): well depth, water level & drilling cost

✓ 1,128 IDWR records · Kootenai County

480 ftmedian well depth
404 ft–580 fttypical depth range
320 ftmedian static water level
20 gpmmedian yield (999 tests)

Pull every recorded well near a Athol (83801) address — $49

How deep are wells in and around Athol (83801), Idaho?

The median drilled well depth in and around Athol (83801) is 480 ft, based on 703 wells with recorded depths in the state IDWR database. Half fall between 404 ft and 580 ft; 90% are shallower than 705 ft.

How much does it cost to drill a well in and around Athol (83801)?

Applying published per-foot rates to the local median depth of 500 ft: drilling and casing alone typically runs $12,500–$32,500; a complete system including pump, pressure tank, and hookup typically runs $30,000–$50,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Athol (83801)?

The median static water level is 320 ft below ground surface (middle half of wells: 160 ft–400 ft), from 1,026 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 8 100–150 ft 17 150–200 ft 10 200–300 ft 35 300–400 ft 64 400–600 ft 425 600+ ft 139
Looking at a specific property in Athol (83801)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Athol (83801)

Free. Goes to licensed drillers working Kootenai County.

Part of Kootenai County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.