⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Bonner County › Sagle (83860)

Sagle, ID (83860): well depth, water level & drilling cost

✓ 1,798 IDWR records · Bonner County

217 ftmedian well depth
138 ft–352 fttypical depth range
55 ftmedian static water level
12 gpmmedian yield (1,682 tests)

Pull every recorded well near a Sagle (83860) address — $49

How deep are wells in and around Sagle (83860), Idaho?

The median drilled well depth in and around Sagle (83860) is 217 ft, based on 804 wells with recorded depths in the state IDWR database. Half fall between 138 ft and 352 ft; 90% are shallower than 517 ft.

How much does it cost to drill a well in and around Sagle (83860)?

Applying published per-foot rates to the local median depth of 227 ft: drilling and casing alone typically runs $5,675–$14,755; a complete system including pump, pressure tank, and hookup typically runs $13,620–$22,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sagle (83860)?

The median static water level is 55 ft below ground surface (middle half of wells: 25 ft–100 ft), from 1,614 measurements.

Drilled depth distribution

0–50 ft 13 50–100 ft 80 100–150 ft 141 150–200 ft 111 200–300 ft 177 300–400 ft 109 400–600 ft 115 600+ ft 58
Looking at a specific property in Sagle (83860)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sagle (83860)

Free. Goes to licensed drillers working Bonner County.

Part of Bonner County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.