⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Bonner County › Colburn (83865)

Colburn, ID (83865): well depth, water level & drilling cost

✓ 724 IDWR records · Bonner County

140 ftmedian well depth
75 ft–292 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (607 tests)

Pull every recorded well near a Colburn (83865) address — $49

How deep are wells in and around Colburn (83865), Idaho?

The median drilled well depth in and around Colburn (83865) is 140 ft, based on 426 wells with recorded depths in the state IDWR database. Half fall between 75 ft and 292 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Colburn (83865)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Colburn (83865)?

The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–80 ft), from 628 measurements.

Drilled depth distribution

0–50 ft 34 50–100 ft 109 100–150 ft 85 150–200 ft 40 200–300 ft 54 300–400 ft 34 400–600 ft 48 600+ ft 22
Looking at a specific property in Colburn (83865)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Colburn (83865)

Free. Goes to licensed drillers working Bonner County.

Part of Bonner County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.