⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Shoshone County › Wallace (83873)

Wallace, ID (83873): well depth, water level & drilling cost

✓ 82 IDWR records · Shoshone County

535 ftmedian well depth
364 ft–550 fttypical depth range
10 ftmedian static water level
9 gpmmedian yield (32 tests)

Pull every recorded well near a Wallace (83873) address — $49

How deep are wells in and around Wallace (83873), Idaho?

The median drilled well depth in and around Wallace (83873) is 535 ft, based on 8 wells with recorded depths in the state IDWR database. Half fall between 364 ft and 550 ft; 90% are shallower than 596 ft.

How much does it cost to drill a well in and around Wallace (83873)?

Applying published per-foot rates to the local median depth of 535 ft: drilling and casing alone typically runs $13,375–$34,775; a complete system including pump, pressure tank, and hookup typically runs $32,100–$53,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wallace (83873)?

The median static water level is 10 ft below ground surface (middle half of wells: 7 ft–24 ft), from 57 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 0 100–150 ft 1 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 5 600+ ft 1
Looking at a specific property in Wallace (83873)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wallace (83873)

Free. Goes to licensed drillers working Shoshone County.

Part of Shoshone County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.