⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Canyon County › Melba (83641)

Melba, ID (83641): well depth, water level & drilling cost

✓ 1,453 IDWR records · Canyon County

272 ftmedian well depth
186 ft–384 fttypical depth range
135 ftmedian static water level
45 gpmmedian yield (1,064 tests)

Pull every recorded well near a Melba (83641) address — $49

How deep are wells in and around Melba (83641), Idaho?

The median drilled well depth in and around Melba (83641) is 272 ft, based on 998 wells with recorded depths in the state IDWR database. Half fall between 186 ft and 384 ft; 90% are shallower than 598 ft.

How much does it cost to drill a well in and around Melba (83641)?

Applying published per-foot rates to the local median depth of 275 ft: drilling and casing alone typically runs $6,875–$17,875; a complete system including pump, pressure tank, and hookup typically runs $16,500–$27,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Melba (83641)?

The median static water level is 135 ft below ground surface (middle half of wells: 85 ft–191 ft), from 1,292 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 48 100–150 ft 93 150–200 ft 131 200–300 ft 279 300–400 ft 205 400–600 ft 131 600+ ft 100
Looking at a specific property in Melba (83641)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Melba (83641)

Free. Goes to licensed drillers working Canyon County.

Part of Canyon County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.