⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Canyon County

Canyon County, Idaho: well depth, water level & drilling cost

✓ 19,683 IDWR records · verified 2026-10-12

147 ftmedian well depth
95 ft–224 fttypical depth range
41 ftmedian static water level
50 gpmmedian yield (14,546 tests)

Pull every recorded well near a Canyon County address — $49

How deep are wells in Canyon County, Idaho?

The median drilled well depth in Canyon County is 147 ft, based on 13,743 wells with recorded depths in the state IDWR database. Half of all wells fall between 95 ft and 224 ft; 90% are shallower than 326 ft. Wells drilled since 2016 have a median depth of 175 ft.

How much does it cost to drill a well in Canyon County?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Canyon County?

The median static water level is 41 ft below ground surface (middle half of wells: 16 ft–85 ft), from 17,644 measurements.

How much water do wells in Canyon County produce?

The median tested yield is 50 gpm (middle half: 30 gpm–85 gpm), from 14,546 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 524 50–100 ft 3,248 100–150 ft 3,194 150–200 ft 2,351 200–300 ft 2,631 300–400 ft 961 400–600 ft 597 600+ ft 237
Looking at a specific property in Canyon County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Canyon County

Free. Goes to licensed drillers working Canyon County.

Well records by ZIP code in Canyon County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.