⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Canyon County › Nampa (83652)

Nampa, ID (83652): well depth, water level & drilling cost

✓ 1,352 IDWR records · Canyon County

131 ftmedian well depth
101 ft–180 fttypical depth range
27 ftmedian static water level
60 gpmmedian yield (1,088 tests)

Pull every recorded well near a Nampa (83652) address — $49

How deep are wells in and around Nampa (83652), Idaho?

The median drilled well depth in and around Nampa (83652) is 131 ft, based on 1,004 wells with recorded depths in the state IDWR database. Half fall between 101 ft and 180 ft; 90% are shallower than 220 ft.

How much does it cost to drill a well in and around Nampa (83652)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nampa (83652)?

The median static water level is 27 ft below ground surface (middle half of wells: 11 ft–50 ft), from 1,162 measurements.

Drilled depth distribution

0–50 ft 30 50–100 ft 185 100–150 ft 400 150–200 ft 225 200–300 ft 139 300–400 ft 20 400–600 ft 5 600+ ft 0
Looking at a specific property in Nampa (83652)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nampa (83652)

Free. Goes to licensed drillers working Canyon County.

Part of Canyon County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.