⟁ Idaho Well Data field records · 2026 survey

Idaho Well Data › Canyon County › Nampa (83686)

Nampa, ID (83686): well depth, water level & drilling cost

✓ 3,240 IDWR records · Canyon County

123 ftmedian well depth
86 ft–214 fttypical depth range
45 ftmedian static water level
60 gpmmedian yield (2,313 tests)

Pull every recorded well near a Nampa (83686) address — $49

How deep are wells in and around Nampa (83686), Idaho?

The median drilled well depth in and around Nampa (83686) is 123 ft, based on 2,221 wells with recorded depths in the state IDWR database. Half fall between 86 ft and 214 ft; 90% are shallower than 422 ft.

How much does it cost to drill a well in and around Nampa (83686)?

Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nampa (83686)?

The median static water level is 45 ft below ground surface (middle half of wells: 20 ft–85 ft), from 2,954 measurements.

Drilled depth distribution

0–50 ft 78 50–100 ft 665 100–150 ft 543 150–200 ft 298 200–300 ft 276 300–400 ft 104 400–600 ft 189 600+ ft 68
Looking at a specific property in Nampa (83686)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nampa (83686)

Free. Goes to licensed drillers working Canyon County.

Part of Canyon County well records.

Method: medians computed from IDWR records (IDWR well records, excluding the 8,758 monitoring, injection, test, dewatering, cathodic-protection and heat-exchange wells that are not water supplies; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.